High Efficiency Desand Equipmanet Potato Starch Milk Sand Remove
Making Machine
Description of desand equipment
Desand machine is mainly used in removing sand ,mud from starch
slurry, cassava slurry ,potato slurry after crushing.It is widely
used in corn starch processing ,cassava starch and cassava flour
processing wheat starch processing ,sago processing ,potato starch
processing .
Advantages of desand equipment
1. There are a variety of models, according to the needs of
customers to provide the best solution.
2. Using high technology, the removal rate of starch is greater
than 98%.
3. Reasonable structure of desand machine, more conducive to water
saving.
The working principle of desand machine
Desand equipment is used to desand material based on the theory of
centrifugal separation .Because of the water inlet pipe installed
on the eccentric position of the cylinder , when water goes into
water inlet pipe through cyclone sand , firstly form downward
surrounding fluid along the surrounding tangential direction and
move down round . Water current turns upward rotation along
cylinder axis as reaches a certain part of the cone. Finally water
discharges from the water outlet pipe . The sundries fall into
bottom conical slag bucket along the cone wall under the force of
fluid inertial centrifugal force and gravity . The cone bottom has
components to prevent sundries from rising up. The sundries can
outflow under the water current effect as long as you open the
manual valve when the sundries in the slag bucket reaches a certain
extent.
Main technical parameters
| Model | Material | Capacity(m3/h) | Feed Pressure | Sand Removal Rate |
| CSX15-Ⅰ | 304 or nylon | 30-40 | 0.2-0.3 MPa | ≥98% |
| CSX15-Ⅱ | 304 or nylon | 60-75 | 0.2-0.3 MPa | ≥98% |
| CSX15-Ⅲ | 304 or nylon | 105-125 | 0.2-0.3 MPa | ≥98% |
| CSX20-Ⅰ | 304 or nylon | 130-150 | 0.2-0.3 MPa | ≥98% |
| CSX20-Ⅱ | 304 or nylon | 170-190 | 0.3-0.4 MPa | ≥98% |
| CSX20-Ⅲ | 304 or nylon | 230-250 | 0.3-0.4 MPa | ≥98% |
| CSX22.5-Ⅰ | 304 or nylon | 300-330 | 0.3-0.4 MPa | ≥98% |
| CSX22.5-Ⅱ | 304 or nylon | 440-470 | 0.3-0.4 MPa | ≥98% |
| CSX22.5-Ⅲ | 304 or nylon | 590-630 | 0.3-0.4 MPa | ≥98% |
Our Service
Pre-sale service
1. Accept customer consultation and customize products according to
customer requirements.
2. Provide customers with product process, equipment parameters and
processes, and train personnel according to customer requirements.
Sale service
1. The company sent technical personnel to the scen of the on-the
-spot guidance equipment installation,debugging and training
operators.
2. If there is any problem during the installation, please contact
the responsible person in time. We will solve the problem in time
to ensure the installation progress.
After-sale service
1. Provide telephone and video support. If the customer has any
problems or abnormal devices in use, you can contact us by phone.
We will help the customer solve the problems by phone or video.
2. If the phone or video doesn't work, the company will send
technicians to the scene to fix the problem.
3. Products purchased in our company, we provide one-year warranty
and lifelong maintenance service.
Company Information
Jinghua company is an engineering and technical company
specializing in starch engineering design, equipment manufacturing,
engineering installation and debugging, technical personnel
training and other work. Has two modern large factory, engineering
and technical personnel more than 30 people, can provide
installation services overseas .Company for China starch industry
association executive director units, executive director of the
association of Chinese cassava starch industry unit.
Our Factory
Our Office
Our Workshop
Our Workers
