Continuous Work Airflow Dryer Potato Starch Drying Making Machine
Starch Production Line
Introduction of modified starch dry machine
Airflow dryer is widely used for powdery drying, and the humidity
is controlled between 14% and 20%.
Main Features of airflow dryer
1. The whole system adopts automatic control.
2. Through measuring on feeding material moisture,or temperature
difference between inlet and outlet,the feeding quantity and inlet
steam volume can be automatic adjusted,thus the water content of
product could reach the technology requirement.
3. This kind airflow dryer is not only suitable to all kinds potato
kinds starch to be dried,but also adaptable to the drying of corn
starch and wheat starch.
The working principle of airflow dryer
The cold air enters the radiator plate through the air filter, and
the hot air flow after heating enters the dry air pipe. Meanwhile,
the wet material enters the hopper of the feeding unit from the wet
starch inlet, and is transported into the hoist by the feeding
winch.The hoist rotates at high speed to drop the wet material into
the dry duct, so that the wet material is suspended in the high
speed hot air stream and heat is exchanged.After the material is
dried, it enters the cyclone separator with the airflow, and the
separated dry material is discharged by wind winding, and the
finished product is screened and packed into the warehouse. And the
separated exhaust gas, by the exhaust fan into the exhaust gas
duct, into the atmosphere.
Main technical parameters
| Model | DG-3.2 | DG-4.0 | DG-6.0 | DG-10.0 |
| Output(t/h) | 3.2 | 4.0 | 6.0 | 10.0 |
| Power capacity(Kw) | 97 | 139 | 166 | 269 |
| Moisture of wet starch(%) | ≤40 | ≤40 | ≤40 | ≤40 |
| Moisture of dry starch(%) | 12-14 | 12-14 | 12-14 | 12-14 |
Our Service
Pre-sale service
1. Introducing detail features and application of the products to
customer.
2. Selecting economical and practical machines for customer.
3. Providing operation data of the related machine.
4. Providing means of trial performance for customer.
5. Flow chart and factory designing layout .
Sale service
1. Recommending engineering conditions required for installation of
the machine.
2. Communicating the manufacturing progress of machines with
customer in time.
3. Project planning and design services.
After-sale service
1. Training of equipment maintenance and operating personally.
2. Installation and commissioning of equipment until everything is
functional.
3. One year warranty and providing long-term maintenance service
and spare parts.
4. Giving technical support to customer for developing new product.
5. Engineers available to serve machinery overseas.
Packing & Shipping
Packing : Customize the wooden case according to the size of the
product.
Delivery: 14 days after receiving pre-payment (on time according to
contract strictly).
