Electric New Condition Nylon Cassava Starch Slurry Desand
Processing Equipment
Introduction of electric starch desand machine
Desand hydrate cyclone is mainly used in removing sand ,mud from
starch slurry, cassava slurry ,potato slurry after crushing.It is
widely used in corn starch processing ,cassava starch and cassava
flour processing wheat starch processing ,sago processing ,potato
starch processing.
Advantages of desand equipment
1. There are a variety of models, according to the needs of
customers to provide the best solution.
2. Using high technology, the removal rate of starch is greater
than 98%.
3. Reasonable structure of desand machine, more conducive to water
saving.
Main technical parameters
| Model | Material | Capacity(m3/h) | Feed Pressure(MPa) | Sand Removal Rate |
| CSX15-Ⅰ | 304 or nylon | 30-40 | 0.2-0.3 | ≥98% |
| CSX15-Ⅱ | 304 or nylon | 60-75 | 0.2-0.3 | ≥98% |
| CSX15-Ⅲ | 304 or nylon | 105-125 | 0.2-0.3 | ≥98% |
| CSX20-Ⅰ | 304 or nylon | 130-150 | 0.2-0.3 | ≥98% |
| CSX20-Ⅱ | 304 or nylon | 170-190 | 0.3-0.4 | ≥98% |
| CSX20-Ⅲ | 304 or nylon | 230-250 | 0.3-0.4 | ≥98% |
| CSX22.5-Ⅰ | 304 or nylon | 300-330 | 0.3-0.4 | ≥98% |
| CSX22.5-Ⅱ | 304 or nylon | 440-470 | 0.3-0.4 | ≥98% |
| CSX22.5-Ⅲ | 304 or nylon | 590-630 | 0.3-0.4 | ≥98% |
The Working Principle of Desand Machine
Desand equipment is used to desand material based on the theory of
centrifugal separation .Because of the water inlet pipe installed
on the eccentric position of the cylinder , when water goes into
water inlet pipe through cyclone sand , firstly form downward
surrounding fluid along the surrounding tangential direction and
move down round . Water current turns upward rotation along
cylinder axis as reaches a certain part of the cone. Finally water
discharges from the water outlet pipe . The sundries fall into
bottom conical slag bucket along the cone wall under the force of
fluid inertial centrifugal force and gravity . The cone bottom has
components to prevent sundries from rising up. The sundries can
outflow under the water current effect as long as you open the
manual valve when the sundries in the slag bucket reaches a certain
extent.
Real application case
Our Service
Pre-sale service
1.Introducing detail features and application of the products to
customer.
2.Selecting economical and practical machines for customer.
3.Providing operation data of the related machine.
4.Providing means of trial performance for customer.
5.Flow chart and factory designing layout .
Sale service
1.Recommending engineering conditions required for installation of
the machine.
2.Communicating the manufacturing progress of machines with
customer in time.
3.Project planning and design services.
After-sale service
1.Training of equipment maintenance and operating personally.
2.Installation and commissioning of equipment until everything is
functional.
3.One year warranty and providing long-term maintenance service and
spare parts.
4.Giving technical support to customer for developing new product.
5.Engineers available to serve machinery overseas.
Our Customer
Cameroon Agrohub Bod Cassava Starch Factory(2t/H)
Ghana Twin Rock Limited Cassava Starch Factory(5t/H)
Cameroon Scaprosee Coop Ca Cassava Starch Factory(2t/H)
Bengal Rahman Chemicals Limited Cassava Starch Factory( 10t/H)
Nigera Psaltry International Co., Ltd Cassava Starch
Factory(300t/D)
The Philippines Ricor Mills Corp.Starch Factory(12t/H & 20t/H)
Indonesia Pt. Asrindo Citrasubur Makmur Cassava Starch
Factory(25t/H)
